SNOWBOARDS

GENERAL SNOWBOARD CONSTRUCTION:
Teaming up with two of the most respected snowboard factories in the world ensures that as the sport progresses, our technology and engineering capabilities do as well. Our development team works countless hours to make sure every board pressed lives up to our reputation for quality, shelf appeal and most of all, the ability to give you some of the best days riding in your life. We build our boards with a huge emphasis on the final pricetag without sacrificing any craftsmanship or quality. Continued performance day after day and ollie after ollie as well as turn after turn. Technine snowboards offer countless days of exceptional rideability and good times. For the W18 collection we introduced few innovative shapes, new tougher cores and camber profiles, and of course, paying special attention to quality as well as setting a new standard for freestyle, park and urban snowboard design.

BOARD TECH:
Tip-to-tail, edge-to-edge Wood Core Construction: The essence of each board is its core. It all starts with high quality wood!
 
CORE ADDITIVES:
If you want to ollie higher than before and get more power from your pop, additives are the name of the game!

1. Offset Carbon Taping
Complete control in a variety of conditions and terrain! From contact point to contact point, the carbon taping promotes even flex and decreases flex fatigue.
 
2. Full Carbon Taping
Tip-to-tail Carbon and Kevlar taping offers a smooth, even flex and long term stability from the tip to the tail of the board. Enhanced ollies and stomping control for multiple seasons of riding.
 
3. V-Tech Carbon Taping + Fiberglass Reinforcements
Running carbon in a V formation in the tip and tail of the board is all about getting that extra snap in your ollies. A smooth, even flex on the nose and tail will allow for stronger pop and smooth takeoffs when hitting jumps, as well as more stability when landing and riding out.
 
4. Carbon Taiping + Kevlar Cross:
If you want to ollie higher and get the most out of your pop the Carbon Cross stringers will deliver. The X formation in the nose and tail channels the flex of the board and distributes your pop evenly for a clean pop every time.

5. Double Carbon Taiping + Kevlar Cross:
Double the carbon equals double the pop. More bounce to the ounce on a carbon lay up built for the rider who demands performance.
 

BINDINGS

TECHNINE SPLIT BASELESS BINDING TECHNOLOGY EXPLAINED

Traditional bindings create a dead spot under the baseplate that stops you from maximizing the flex of your board. We have developed a binding that is split down the middle allowing for the ultimate connection of rider and board. The split design also paves the way for a lighter binding by using less materials.

BINDINGS IN DETAIL:
Aluminum 6061 base, custed and thermo reinforced split in the middle ( 2 parts base) reduces all possible interferances between binding base and board flex . The “Board Dead Zone” under the binding base is gone. Best result is between angles -21 + 21. ( The avarage duck stand position is between -15 to +15 degree).

The Multi-thickness E.V.A. ( Ethylene-Vinyl-Acetate) pad means impact absorption; the thickness increases under the heel and the toe to absorb landing impacts. 3° degrees canting Tech bed guarantees enhanced control and knee comfort.

The 2 mm Ligthweight thermo formed pad avoids any damages to the board topsheet and increases board/base friction.

The Aluminum 6061 8 mm round wire, is extruded, finely turned, bended, welded to the custed base and then thermo reinforced; this technology facilitate the heelcap to flex in unison with your legs, powering ollie, increasing board feel and reducing fatigue . The round wire shape is radically different and guaranting strength in all directions and zero waste during the production. Each wire is cut to the right length and then bent with no extra material waste.

The Plastic, injected nylon + 15% fiber glass disc, split in the middle, allows the binding base to flex with the board, but transmits full strength to the board vertically to the edge.

The Plastic, injected nylon + 15% fiber glass highback is split in the middle as well to help the rest of the binding components to move freely with the legs. It also features a multi-thickness E.V.A. pad thermo formed; Thin in the lower part and thicker on the top for max calf comfort and impact absorption.

The forward lean adjuster, positioned in the HB arms features 5 different positions with 3 degree increments each, from 0 to 15 degree. The Forward Lean Lateral adjustments, instead of the normal one positioned on the back of the HB, helps to have less snow dragging during the backside turning and, if adjusted independently, it can also help to shape confortably the HB around your leg.

The light stucture, adjustable toe ramp with 6 increments of 3.5 mm each, ensures a tutal maximum adjustment 21 mm to fit the boot size. It also feature a comfortable Multi-thickness E.V.A. pad for better impact absorption

The Comfort King III Ankle strap features an ultra light stucture sorraunded by injected padding. Thick in the center for max comfort and thinner on the sides optimizing the buckle tightness.

The Pro Tech Toe Strap features an ultra light structure cap strap that can be also used as flat strap.

The new 3 Axis T9 Injected aluminum 6061 ratchets ensure a fast release, thanks to the aluminum release button on the front part, to facilitate the opening and the insertion of the ladder strap.

REPLACEMENT PARTS:
If you need a replacement part, a digital photo of the product showing the defect will be required. See our replacement parts page for details.

BINDING PARTS

Split Baseless Binding
Split Heelcap, can be connected to increase stiffness
Wire Heelcap Structure
Split Highback Construction allowing 4 different options per foot included in one binding
Techbed / Techbed 3deg
2 screws are used to lock the binding structure to the aluminium split disc. These 2 screws are also to adjust the angle. 4 screws are then used to lock the split disc on the boards and to adjust the stance.
Forward lean adjustment integrated into the highback arms to decrease weight and material
underlying rubber gasket decreases damaging interferrence betwenn binding and board contact points
Adjustable Toe Ramp
Toe Strap
Ankle Strap